Effect of Hot Extrusion Parameters on Microstructure and Mechanical Properties of Magnesium Matrix Composites
Keywords:
Magnesium Matrix Composites, Hot Extrusion, Microstructure, Mechanical PropertiesReferences
Saravanan, R. A. and Surappa, M. K., Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite. Materials Science and Engineering: A, 2000. 276(1): p. 108-116.
Somekawa, H. and Mukai, T., Effect of grain refinement on fracture toughness in extruded pure magnesium. Scripta Materialia, 2005. 53(9): p. 1059-1064.
Chen, Y., Wang, Q., Peng, J., Zhai, C., and Ding, W., Effects of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy. Journal of Materials Processing Technology, 2007. 182(1–3): p. 281-285.
Wang, X. J., Wu, K., Zhang, H. F., Huang, W. X., Chang, H., Gan, W. M., Zheng, M. Y., and Peng, D. L., Effect of hot extrusion on the microstructure of a particulate reinforced magnesium matrix composite. Materials Science and Engineering: A, 2007. 465(1): p. 78-84.
Tun, K. S. and Gupta, M., Effect of extrusion ratio on microstructure and mechanical properties of microwave-sintered magnesium and Mg/Y2O3 nanocomposite. Journal of Materials Science, 2008. 43(13): p. 4503-4511.
Zhang, Z. M., Xu, H. Y., and Wang, Q., Corrosion and mechanical properties of hot-extruded AZ31 magnesium alloys. Transactions of Nonferrous Metals Society of China, 2008. 18: p. 140-144.
Jiang, B., Gao, L., Huang, G. J., Ding, P. D., and Wang, J. G., Effect of extrusion processing parameters on microstructure and mechanical properties of as-extruded AZ31 sheets. Transactions of Nonferrous Metals Society of China, 2008. 18: p. 160-164.
Shahzad, M. and Wagner, L., Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80. Materials Science and Engineering: A, 2009. 506(1–2): p. 141-147.
Zhang, B. P., Geng, L., Huang, L. J., Zhang, X. X., and Dong, C. C., Enhanced mechanical properties in fine-grained Mg–1.0Zn–0.5Ca alloys prepared by extrusion at different temperatures. Scripta Materialia, 2010. 63(10): p. 1024-1027.
Li, D. Q., Wang, Q. D., Ding, W. J., Blandin, J. J., and Suery, M., Influence of extrusion temperature on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Transactions of Nonferrous Metals Society of China, 2010. 20(7): p. 1311-1315.
