Cloud-Hosted Advanced Manufacturing and Assembly

Authors

  • Prof Priyavrat Thareja Dean, Faculty of Engineering and Technology, G.N.A. University Phagwara Punjab, India.
  • Rocky Sharma Scholar, M.Tech (Mech.Engg:. Product Design and Development), G.N.A. University Phagwara Punjab.

Keywords:

Cloud, Cloud computing, Cloud storage, Cloud assembly, Manufacturing over the cloud, Cloud-based design and manufacturing

Abstract

The demand for advancements in manufacturing technology is pulled by both competitive pressures and just in time ambitions of customers. Competitive forces mandate that the costs of raw materials, resources and infrastructural requirements are all asymptoted to bare minimum. How this world continually evolving as a global village can lower each of these costs is the challenge. A solution is being sought in making man, material, and machines facilitated from cloud. The cloud thinking prescribes that the resources are available to all the prospective or current users at call where one pays for actual use. The overheads are thereby minimized. This work attempts to review the applicability of this resource and thinking, i.e., of cloud as a facilitator of just in time, mass customization to maximize value @ design to manufacture to assembly of engineered products. The paradigm is based upon utilization of innovation and cloud to add value. It attempts to qualify that Innovaluation (innovation and valuation) is the mantra for tomorrow’s competiveness or rather competence.

References

[1]. Wu L, Yang C. A solution of manufacturing resources sharing in cloud computing environment. 7th International Conference, CDVE 2010, Calvia, Mallorca, Spain. Sep 19-22, 2010. Proceedings Book Part IV, 2010; 247-52.
[2]. Thareja P. Directions in production engineering research. Part-1. Journal of Advanced Research in Production and Industrial Engineering 2014; 1(1): 12-24.
[3]. Thareja P. Directions in production engineering research. Part-2. Journal of Advanced Research in Production and Industrial Engineering 2015; 2(1): 7-19.
[4]. Thareja P. Directions in production engineering research. Part-3. Journal of Advanced Research in Production and Industrial Engineering 2015; 2(2): 17-28.
[5]. Thareja P. Directions in production engineering research. Part-IV. Journal of Advanced Research in Production and Industrial Engineering 2016; 3(2): 30-52.
[6]. Thareja P. Hawking perishable goods : 21st century style. In: Saini S, Gurjar BR (Eds). Entrepreneurship & Education B. Challenges And Strategies. Rawat Publications 2001.
[7]. Rochwerger B et al. Reservoir – When one cloud is not enough. Computer 2011; 44(3): 44-51.
[8]. Armbrust M et al. A view of cloud computing. Commun. ACM 2010; 53(4): 50-58.
[9]. IDC Manufacturing Insights #MI224865, September 2010 and IDC Manufacturing Insights #MI223196. Apr 2010,
[10]. Mell P, Grance T. The NIST definition of cloud computing. NIST Special Publication 2011; 800-145. Available at: http://csrc.nist.gov/publications/nistpub s/800-145/SP800-145.pdf>.
[11]. Aceto G et al. Cloud monitoring: A survey. Comput. Netw 2013. Available from: http://dx.doi.org/10.1016/ j.com net.2013.04.001, https://www.research gate.net/publication/257582212
[12]. Service Architecture. http://www. service-architecture.com/articles/cloudcomputing/ cloud_computing_definition. html
[13]. Weinman J. Mathematical proof of the inevitability of cloud computing. https:// cloudonomics.wordpress.com/2009/11/3 0/mathematical-proof-of-the-inevitability -of-cloud-computing/.
[14]. Andersen K. The benefits of cloud computing in the manufacturing industry. Jun 06, 2014. Available http://www.masss. com/blog/bid/183210/The-Benefitsof- Cloud-Computing-in-the- Manufacturing-Industry
[15]. Thareja P. People perspective about evolving, brains of givers or takers! Omniscience: A Multi-disciplinary Journal. 2016; 6(3).
[16]. Kathleen D, Frank P. The market for open innovation: increasing the efficiency and effectiveness of the innovation process RWTH-TIM group 2010. study.openinnovation. com. 144 pages.
[17]. A European publicprivate partnership on the future internet available http:// www.eurosfaire.prd.fr/7pc/doc/1266942 506_ppp_future_internet_07_12_2009.p df
[18]. Vladimir V et al. Distributed computer and communication networks. 17th International Conference DCCN-2013. Springer https://books.google.co.in/ books?isbn=3319052098
[19]. Thareja P et al. Innovaluation – The skill set for Make-In-India initiative in IoT era. Trends in Mechanical Engineering & Technology 2016; 6(3).
[20]. http://www.thareja.com/2016/02/21/en gineers-show-the-way/#more-550
[21]. Peng W, Robert X, Zhaoyan F. Cloud computing for cloud manufacturing: Benefits and limitations. J. Manuf. Sci. Eng 2015; 137(4): 040901
[22]. Khatri S. Demystifying cloud computing with apartments and houses. 2015. https://www.topcoder.com/blog/demys tifying-cloud-computing-with-apartments -and-houses/
[23]. Thareja P. A total quality organisation through people (Part 5): People as change agents. FOUNDRY: An Indian Journal For Progressive Metal Casters 2006); xviii(5): 107: Sep/Oct 2006.
[24]. Thareja P. Psychomotoring skills in teaching of foundry technology. Proceedings of International Seminar on Teaching Methodologies, China. 1989.
[25]. Make in India: Zero Defect, Zero Effect – National Productivity Council. www.npcindia.gov.in/wp-content/.../12/ Productivity-Week-Theme-Paper-2015. pdf
[26]. Thareja P. A total quality organization thru’ people (Part 21: Lean people, mean people, green people). FOUNDRY: An Indian Journal For Progressive Metal Casters May/Jun 2009; XXI(2): 123: 41- 48. Available at SSRN: http://ssrn.com/ abstract=1633896
[27]. Barrett R. Building a Values-Driven Organization: A Whole-System Approach to Cultural Transformation. Boston: Butterworth-Heinemann 2006.
[28]. DSIR quoted in study on innovative interventions required in manufacturing sectors to make them globally competitive (Department of Scientific and Industrial Research), http://www. dsir.gov.in/reports/isr1/1_0_1.pdf. [29]. Kojima A. Japanese Companies’ Actions regarding the Major Trends of the New Industrial Revolution. Editor’s blog Jan 17, 2016 http://www.japanpolicy forum.jp/archives/editor/pt2016011715 3622.html
[30]. Build A Car Online, Design a Car Online | Autobytel.com www.autobytel.com/build-a-car-online/
[31]. Wu D, Zhang L, Jiao J et al. SysML-based design chain information modeling for variety management in production reconfiguration. J. Intell. Manuf 2011; 24(3): 575-96.
[32]. Johnson J, Wu H, Sifleet T et al. A computational method for task allocation and coordination in a distributed design environment DETC 2008; 49417: 595- 605.
[33]. Fenves SJ. A Core Product Model for Representing Design Information NIST 2001.
[34]. Sudarsan R, Han YH, Feng SC et al. Objected-oriented representation of electro-mechanical assemblies using umL. NIST 2003.
[35]. Thareja P. SHEQ to shake the car development for tomorrow–Part I. Trends in Mechanical Engineering & Technology. 2015; 5(1): 6-19p.
[36]. Thareja P. SHEQ to Shake the car development for tomorrow–Part II. Trends in Mechanical Engineering & Technology 2016; 6(1): 79-95.
[37]. Fuh JYH, Li WD. Advances in collaborative CAD: The state-of-the art. Comput-Aided Des 2005; 37(5): 571-81. [38]. http://www.plex.com/industries-andsolutions/ automotive.html
[39]. Wang L, Shen W, Xie H et al. Collaborative conceptual design – State of the art and future trends. Comput- Aided Des 2002; 34(13): 981-96.
[40]. Wu D, Thames JL, Rosen DW et al. Enhancing the product realization process with cloud-based design and manufacturing systems. Trans ASME J Comput Inform Sci 2013;13(4). http:// dx.doi.org/10.1115/1.4025257. 041004- 041004-14
[41]. Dazhong W et al. Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation. Computer-Aided Design 2015; 59: 1-14.
[42]. Chief editor’s remarks. Digital Thinking, eNVVY 2016; 1(12).
[43]. Discrete Manufacturing Capabilities http://www.plex.com/products/manufac turing-operations-management-mom/ production-management.html
[44]. Thareja P, Mahapatra PB, Sharma DD. Metamorphosis in teaching of materials: A case study aligning manufacturing requirements. In Proceedings of National Conference on Advances in Materials and Manufacturing Technology. Mar 2010.
[45]. Thareja P, Mahapatra PB, Sharma DD. Total quality management-a developmental perspective. Journal of Production Research & Management 2011; 1(1): 34-52.
[46]. Thareja P. Holean human leadershipdeveloping from first principles. IBA Journal of Management & Leadership 2011; 3(1): 59-70.

Published

2019-01-07